Pilot Valves

ASCO Pilot Valves are designed to control the flow of air, gas, water, and other fluids in various industrial applications. These valves are known for their reliability, durability, and high performance. They come in different configurations and are engineered to meet the specific needs of different industries.

Whether you need a valve for a high-pressure application or a low-pressure one, ASCO Pilot Valves are the perfect solution. With their precise control and accurate measurement, they ensure smooth and efficient operation of your equipment. They are also easy to install and maintain, making them a popular choice for many industries.

ASCO Pilot Valves are made of high-quality materials that are resistant to wear, corrosion, and extreme temperatures. They are tested to withstand harsh environments and provide consistent performance, even in the toughest conditions. They are also compatible with a wide range of fluids and gases, making them versatile and adaptable to many applications.

In summary, ASCO Pilot Valves are reliable, durable, and high-performance valves that are designed to meet the needs of different industries. With their precise control, accurate measurement, and resistance to wear and corrosion, they ensure smooth and efficient operation of your equipment, saving you time and money in the long run.

ASCO Series 327 solenoid valve with explosion proof operators NF or WSNF type for use in potentially explosive atmospheres. Compliance with the Essential Health and Safety Requirements has been assured by compliance with the International and European Standards EN-IEC 60079-0, EN-IEC 60079-1 and EN-IEC 60079-31. The solenoid valves are recommended for pilot applications with high ow, wide pressure ranges and no minimum operating pressure.

Series 327 - Brass and Stainless Steel, High Flow - Exida Approved

The Series 327 ASCO is a line of high-flow piloting valves that are designed to operate with zero minimum pressure. They are equipped with a balanced poppet construction, which allows them to handle high flow rates at low power levels. These valves are well-suited for use in power plants, refineries, and chemical processing facilities, where the ability to handle high flow rates is important. The Series 327 ASCO piloting valves are designed for durability and long service life. They feature PTFE rider rings and graphite-filled seals, which reduce friction and eliminate sticking to extend the life of the valve. These features make the Series 327 valves a reliable and cost-effective choice for a wide range of industrial applications.

Series 327 - Direct Operated, Basic Flow, Balanced Poppet, 1/4

The Series 327 ASCO is a line of high-flow piloting valves that are designed to operate with zero minimum pressure. They are equipped with a balanced poppet construction, which allows them to handle high flow rates at low power levels. These valves are well-suited for use in power plants, refineries, and chemical processing facilities, where the ability to handle high flow rates is important. The Series 327 ASCO piloting valves are designed for durability and long service life. They feature PTFE rider rings and graphite-filled seals, which reduce friction and eliminate sticking to extend the life of the valve. These features make the Series 327 valves a reliable and cost-effective choice for a wide range of industrial applications.

Series 327 - Direct Operated, High Flow, Balanced Poppet, 1/4-1/2

ASCO Series 327 redundant solenoid valves are recommended for fail safe pilot applications, combining high flow, wide pressure range and absence of minimum operating pressure. When the redundant valve controls an actuator, the actuator remains in position as long as one of the two coils is energised. To exhaust the actuator both solenoids have to be de-energised.

Series 327 - Solenoid Valve Direct Operated Balanced Poppet G1/4

The 3/2-way direct-acting solenoid valves in the ASCO Series 327, commonly known as the 8327, have zero minimum operating pressure requirements. It is the perfect choice for power plants, refineries, and chemical processing facilities due to its balanced poppet structure, which allows for high flows at low power levels. To provide great service life, the valve’s PTFE riding rings and graphite-filled seals reduce friction and get rid of sticking. Process valve piloting applications are perfect for 3/2-way direct-acting solenoid valves.

Series 327 - Solenoid Valves No Voltage Release Manual Reset (Tamperproof)

Series 551 - Solenoid Spool Valve

ASCO Series 316 valves are brass or stainless steel bodies, high flow pilot valves with two spring return floating diaphragms for larger single actuators. These can be internally piloted, or externally piloted to convert valve to zero minimum pressure differential operation by flipping a gasket. Naturally, these solenoid valves satisfy all relevant EC Directives.

ASCO Series 316 - Pilot Operated, High Flow, Floating Diaphragms, G3/8 - G1

The ASCO Series 316 solenoid valves are high-flow, 3-way valves designed for use in applications where a large amount of fluid or gas needs to be controlled. They feature a diaphragm poppet design that allows them to control a wide range of media, including air, inert gases, and liquids. The resilient seating of these valves provides tight shutoff, ensuring that the flow of fluid is completely stopped when the valve is closed. These valves are used to pilot large actuators and provide quick closing of large control valves. This makes them suitable for use in systems that require fast and precise control of fluid flow, such as process control systems, fluid power systems, and large-scale industrial applications. In conclusion, the ASCO Series 316 solenoid valves are a high-performance, 3-way valve designed for use in applications that require fast and precise control of large amounts of fluid or gas. Their diaphragm poppet design and resilient seating provide tight shutoff and ensure reliable performance in a variety of applications.

Series 316 - ASCO High Flow Floating Diaphragm Solenoid Valves NPT3/8-NPT1

The ASCO Series 316 valves are high-performance solenoid valves designed for use in a variety of industrial and commercial applications where precise control of fluid flow is required. These valves are ideal for applications where a large flow rate is needed, as they have a brass body that can handle high flow rates and pressure conditions. The Series 316 valves feature two floating diaphragms, which provide a balanced construction that ensures smooth and reliable operation, even under heavy load conditions. The direct lift pilot operator is designed with a resilient soft seating, which helps to ensure tight shut off and control the floating diaphragms. This combination of design features makes the Series 316 valves ideal for applications that require high flow rates and absolute tight shut off. The Series 316 valves are designed to vent to 0 BAR, which helps to ensure reliable operation, even in applications with high flow rates and heavy loads. Additionally, the valves satisfy all relevant EC directives, ensuring compliance with the latest European safety and environmental standards. In summary, the ASCO Series 316 valves are high-performance solenoid valves designed for use in a variety of applications where precise control of fluid flow is required. These…

Series 316 - Pilot Operated High Flow Floating Diaphragms G3/8 - G1

The ASCO Series 320 solenoid valves are known for their versatility and broad range of applications. They are a type of direct-acting valve, meaning that the solenoid directly controls the movement of the valve’s internal components, which in turn opens or closes the flow of fluid. This makes them well-suited for use in systems that require fast and reliable control of fluid flow. The valves are available in several configurations to meet the specific requirements of different applications and environments. The voltage-ranging construction is designed for use with a wide range of voltage inputs, making them suitable for use in different parts of the world with varying electrical standards. The harsh-environment construction is built to withstand harsh conditions such as high temperatures, corrosive environments, and vibration, making them ideal for use in industries such as petrochemical, pharmaceutical, and food processing. The direct-mount construction allows for easy installation in tight spaces, while the dribble-control construction is designed to reduce fluid flow when the valve is in the partially open position, which can be important in some applications. The long-life construction is designed to provide reliable performance over an extended period, making it well-suited for use in systems that run continuously. In…

Series 320 - 1/4, Brass and Stainless Steel, in-line

The ASCO JOUCOMATIC Series 320 3/2 Roller Pilot Valves are mechanically operated valves that are designed for use in a variety of applications, including the control of air or neutral gases. They feature a snap-action operation, with a low actuating force that makes them easy to use. The body of the valve is made from light alloy, while the internal parts are made of stainless steel and light alloy. The seal is made of nitrile (NBR) to ensure a tight and reliable seal. One of the key features of the Series 320 pilot valves is that they are suitable for use with filtered and lubricated air or neutral gases. They are easy to install and maintain, and they are known for their high level of performance and durability. Overall, the ASCO JOUCOMATIC Series 320 3/2 Roller Pilot Valves are a reliable and efficient choice for a variety of applications. They are adaptable to a wide range of applications, making them an excellent choice for a variety of industrial and commercial settings.

Series 320 - ASCO JOUCOMATIC 3/2 Roller Pilot Valves G1/8

The ASCO Series 320 Pilot Valve is a manually operated valve that is designed for panel mounting in sizes 22mm and 30mm. It features snap-action operation, with a low actuating force that makes it easy to use. The body of the valve is made from light alloy, while the internal parts are made of stainless steel and light alloy. The seal is made of nitrile (NBR) to ensure a tight and reliable seal. One of the key features of the Series 320 pilot valve is that it is suitable for use with filtered and lubricated air or neutral gases. It is easy to install and maintain, and it is known for its high level of performance and durability. Overall, the ASCO Series 320 Pilot Valve is a reliable and efficient choice for panel mounting applications. It is easy to operate and adaptable to a wide range of applications, making it an excellent choice for a variety of industrial and commercial settings.

Series 320 - Pilot Valve For Panel Mounting 22mm and 30mm

The ASCO Series 314 is a line of direct-acting, general service solenoid valves that can be used as moderate flow pilots for smaller control valves and actuators. These valves are designed with a simple construction, consisting of only a spring and two moving parts, which makes them ideal for basic three-way piloting operation. They are suitable for use in a variety of applications, including analytical and diagnostic equipment, automotive, bottling, dust collector systems, and life science applications. The ASCO Series 314 solenoid valves are known for their reliability and durability, and are able to function accurately and consistently even in harsh environments. They are capable of handling a range of media, including gases, liquids, and steam, and are available in a variety of materials and configurations to suit the specific needs of different applications.

Series 314 - ASCO Numatics Direct Operated Solenoid Valves G1/4

The ASCO Series 314 is a line of direct-acting, general service solenoid valves that can be used as moderate flow pilots for smaller control valves and actuators. These valves are designed with a simple construction, consisting of only a spring and two moving parts, which makes them ideal for basic three-way piloting operation. They are suitable for use in a variety of applications, including analytical and diagnostic equipment, automotive, bottling, dust collector systems, and life science applications. The ASCO Series 314 solenoid valves are known for their reliability and durability, and are able to function accurately and consistently even in harsh environments. They are capable of handling a range of media, including gases, liquids, and steam, and are available in a variety of materials and configurations to suit the specific needs of different applications.

Series 314 - ASCO Numatics Direct Operated Solenoid Valves G1/8

The ASCO Series 314 is a line of direct-acting, general service solenoid valves that can be used as moderate flow pilots for smaller control valves and actuators. These valves are designed with a simple construction, consisting of only a spring and two moving parts, which makes them ideal for basic three-way piloting operation. They are suitable for use in a variety of applications, including analytical and diagnostic equipment, automotive, bottling, dust collector systems, and life science applications. The ASCO Series 314 solenoid valves are known for their reliability and durability, and are able to function accurately and consistently even in harsh environments. They are capable of handling a range of media, including gases, liquids, and steam, and are available in a variety of materials and configurations to suit the specific needs of different applications.

Series 314 - Directed Operated Core Disc Solenoid Valves, 1/8 - 1/4

ASCO Series 342 4/2 slide disc valves come in single or dual solenoid configurations, ideally suited to control double acting pneumatic actuators. These valves do not require a minimum operating pressure. Direct lift solenoid valves have spring loaded sliding resilience for an absolutely tight shut-off. The ASCO Series 342, also known as 8342, is a line of high-performance 4-way valves designed for a range of applications. The valves feature a slide-style design and are available in single or dual solenoid configurations. They are known for their direct-acting operation and high-flow construction, making them ideal for various industries such as analytical and diagnostic equipment, biofuels, dust collector systems, heating equipment, and refining applications. These valves offer efficient performance and can handle demanding fluid control applications.

Series 342 - 4/2 Way Direct Operated Slide Disc Single/Dual Solenoid

The ASCO Series 342, also known as 8342, is a line of high-performance 4-way valves designed for a range of applications. The valves feature a slide-style design and are available in single or dual solenoid configurations. They are known for their direct-acting operation and high-flow construction, making them ideal for various industries such as analytical and diagnostic equipment, biofuels, dust collector systems, heating equipment, and refining applications. Series 342 valves offer efficient performance and can handle demanding fluid control applications. These valves come in either single (mono-stable) or dual (bi-stable) solenoid versions and feature an integrated pilot and slide disc mechanism. The solenoid valves are made of brass and comply with all relevant European Commission (EC) Directives, ensuring they meet necessary regulations and standards.

Series 342 - ASCO 4/2 Direct Operated Brass Solenoid Valves NPT1/4-NPT3/8

The ASCO Series 256 Direct Operated Solenoid Valves are designed with a quick disassembly core tube for easy maintenance of internal parts. The standard disc seal is made of FPM and is suitable for a wide range of operating temperatures and compatible with many fluids. The valve has a standard manual operator for easy installation and AC/DC interchangeability of the solenoid without disassembling the valve. It complies with UL and CSA standards and is a compact

Series 256 - ASCO Direct Operated Solenoid Valves G1/4-G1/8

ASCO series 256 direct operated solenoid valve manifold subbases are very compact and easy to assemble. Has a mixing or distribution function, AC/DC interchangeability of the solenoid without disassembling the valve is possible. Core tube can be quickly disassembled for easier maintenance of internal parts. Compliance with UL and CSA standards.

Series 256 - ASCO Direct Operated Solenoid Valves Manifold Subbases G1/8

The ASCO series 345 miniature brass or stainless steel bodied 5/2 ported valves are designed for controlling double-acting cylinders in hydraulic or pneumatic systems. These valves feature a combination of a direct lift solenoid valve and a pilot-operated poppet that provides a resilient soft seating for a secure shut-off. The valves require a minimum operating pressure of 0.7 bar to function properly. Additionally, the solenoid valves comply with all relevant European Commission (EC) Directives, ensuring they meet necessary regulations and standards.

Series 345 - ASCO 5/2 Pilot Operated Brass Solenoid Valves NPT1/4

ASCO JOUCOMATIC Series 307 is a microvalve that is composed of an operating head, an adaptor, an intermediary subbase, and one or two pneumatic modules. These modules allow for a variety of different functions, including NC, NO, NC+NC, NO+NO, and NC+NO. This makes the Series 307 microvalve highly versatile and adaptable to a wide range of applications. The microvalve is designed to meet the highest quality standards, and it is available with either metal or plastic buttons. The buttons are securely and robustly fastened to the microvalve, ensuring that they remain in place even under heavy use. Overall, the ASCO JOUCOMATIC Series 307 is a reliable and efficient choice for a variety of applications. Its modular design allows for a range of different functions, and it is built to withstand heavy use and meet high quality standards.

Series 307 - ASCO JOUCOMATIC Push Button Valves - 22mm Panel Mount

The ASCO Series 307 Direct Operated 3/2 AC solenoid valves with a balanced construction type. They are designed with full flow capacity and a push-type manual operator, and are available in a range of configurations including universal, normally closed, and normally open operation. The valve body is made of brass or stainless steel, depending on the specific model. The Series 307 Direct Operated solenoid valves are typically used in a variety of applications where precise control of fluid flow is required. They may be used in pneumatic systems, as well as in other types of fluid control systems. The balanced construction of these valves allows them to operate smoothly and reliably, even at high flow rates and under heavy load conditions.

Series 307 - Direct Operated Full Flow Cast Iron Or St Steel Enclosure G1/4 - G1/2

The ASCO Series 307 Pilot Operated 3/2 AC solenoid valves with a balanced construction type that can be internally piloted, or externally piloted to convert valve to zero minimum pressure differential operation by applying auxiliary air. They are designed with full flow capacity and a push-type manual operator, and are available in a range of configurations including universal, normally closed, and normally open operation. The valve body is made of brass or stainless steel, depending on the specific model. Using such high quality materials yields a high reliability and long service life. These valves satisfy all relevant EU directives. The Series 307 Pilot Operated solenoid valves are typically used in a variety of applications where precise control of fluid flow is required. They may be used in pneumatic systems, as well as in other types of fluid control systems. The balanced construction of these valves allows them to operate smoothly and reliably, even at high flow rates and under heavy load conditions.

Series 307 - Pilot Operated Pressure Assisted Balanced Poppet Valves G1/4 - G1/2

These ASCO Series 307 valves have a lever type manual reset function. This means that the valve has to be energised as well as manually operated before it stays in the ‘latched’ position. The No Voltage Release function will make sure that the valve trips when de-energised. These valves are recommended for 3/2 pilot applications with full flow and wide pressure ranges.

Series 307 - Solenoid Valves No Voltage Release Lever Type

ASCO Series 307 valves are three way solenoid valves with orifice and pipe connections in the valve body. Valve can be operated with no minimum operating pressure. Brass and Stainless Steel balanced poppet valves with full flow capacity. These solenoid valves satisfy all relevant EC Directives

Series 307 - Solenoid Valves No Voltage Release Manual Reset Type

ASCO Series 356, compact design for the control of single-acting actuators or filling and draining cycles. Wide range of ow and pressure ratings. Quick disassembly of core tube for easy maintenance of internal parts. Standard disc seal made of FPM suitable for a wide range of operating temperatures and compatible with many uids. Standard manual operator allows an easy installation

Series 356 - ASCO Direct Operated Solenoid Valves G1/8, G1/4

ASCO series 356 features a very small size making it compact and easy to assemble. Has a mixing and distribution function. AC/DC interchangeability of the solenoid without disassembling of the valve. Quick disassembly of core tube for easy maintenance of internal parts. Compliance with UL and CSA standards. The solenoid valves satisfy all relevant EC Directives.

Series 356 - ASCO Direct Operated Solenoid Valves Multiple Manifold G1/8

ASCO Series 257

The ASCO JOUCOMATIC Series 308 3/2 Heavy Duty Roller Pilot Valves are designed for use in demanding industrial environments. They feature a centre closed poppet valve design, with a body made of diecast material and internal parts made of stainless steel and elastomer. This makes them highly durable and resistant to wear and tear. One of the key features of the Series 308 valves is their built-in exhaust silencer, which helps to reduce noise levels. The exhaust port can also be piped, allowing for even greater control over noise levels. These valves also come with instant fittings made of brass, which makes them easy to install and maintain. Overall, the ASCO JOUCOMATIC Series 308 3/2 Heavy Duty Roller Pilot Valves are a reliable and efficient choice for a variety of applications. They are built to withstand heavy use and are resistant to wear and tear, making them an excellent choice for demanding industrial environments.

Series 308 - ASCO JOUCOMATIC 3/2 Heavy Duty Roller Pilot Valves

High-flow/high-pressure bodies on the ASCO Series 308, also known as 8308, tamper-proof manual reset solenoid valves help to minimise unintentional valve startup. They are perfect for managing crucial processes in hostile settings.

Series 308 - Solenoid Valves No Voltage Release Lever Type

The ASCO JOUCOMATIC Series 310 3/2 Roller Pilot Valves are designed for use in a variety of applications, including the control of air or neutral gases. They feature a spool and poppet design with a closed centre, and their body is made from zinc diecasting for added durability. The internal parts are made of acetal, and the seal is made of nitrile (NBR) to ensure a tight and reliable seal. One of the key features of the Series 310 pilot valves is that they don’t have a minimum operating differential pressure. This makes them highly efficient and allows them to operate reliably even at low pressure levels. They are suitable for use with filtered, lubricated, or non-lubricated gases, making them adaptable to a wide range of applications. Overall, the ASCO JOUCOMATIC Series 310 3/2 Roller Pilot Valves are a reliable and efficient choice for a variety of applications. They are easy to install and maintain, and they are known for their high level of performance and durability.

Series 310 - ASCO JOUCOMATIC 3/2 Roller Pilot Valves 4mm-G1/8

The ASCO JOUCOMATIC Series 310 Push Button Valves are manually operated valves that are designed for use in a variety of applications, including the control of air or neutral gases. They feature a spool and poppet design with a closed centre, and their body is made from zinc diecasting for added durability. The internal parts are made of acetal, and the seal is made of nitrile (NBR) to ensure a tight and reliable seal. One of the key features of the Series 310 push button valves is that they are suitable for use with filtered, lubricated, or non-lubricated gases, making them adaptable to a wide range of applications. They are easy to operate, with a simple push button design that allows users to control the flow of gas with ease. Overall, the ASCO JOUCOMATIC Series 310 Push Button Valves are a reliable and efficient choice for a variety of applications. They are easy to install and maintain, and they are known for their high level of performance and durability.

Series 310 - ASCO JOUCOMATIC Push Button Valves

ASCO Series 260/360 valves are generally used for medical analysers, biotechnology and gas analysers. Can be used to control acids and bases, as well as analytical reagents. Any application were the fluid may not come into contact with metal parts and with the electromagnetic control section of the solenoid valves. The valves are ideal for controlling aggressive fluids or when high purity is demanded and have easy to flush internal cavities.

Series 260/360 - ASCO 2/2 - 3/2 Miniature Solenoid Valve Rocker Pad Mounting Body

The ASCO Series 408 solenoid valves are designed for use in a variety of industrial and commercial applications. These valves feature a no voltage release lever type, which allows the valve has to be energized as well as manually operated before it stays in the latched position. The Series 408 solenoid valves are made with high-quality materials and are built to last, making them a reliable choice for your valve needs. They are suitable for use with a range of media, including water, air, and gases, and are available in a range of sizes to meet your specific requirements. These solenoid valves are easy to install and maintain, and offer smooth and reliable operation.

Series 408 - Solenoid Valves No Voltage Release Lever Type

The ASCO Series 110 Dust Collector Pilot Valve Boxes are compact boxes designed for remote control of pulse valves. They are equipped with direct operated, integrated pilot valves. The valve seats are integrated into the base plate and the boxes have a common exhaust connection, which can be fitted with 1 or 2 silencers. These boxes are built to withstand harsh conditions with heating elements for low temperature operation and an IP 65 degree of protection. The components also meet all relevant EC directives.

Series 110 - ASCO Dust Collector Pilot Valve Boxes

ASCO Series 370 are high-quality solenoid valves that are designed to meet the needs of various industrial and commercial applications, particularly those in the oil and gas, and power industries. These valves come equipped with three ports in their bodies, making them very convenient to install and use. With a compact design that has been proven to be reliable, the ASCO Series 370 solenoid valves are also built to withstand tough environments. They come with a wide range of enclosures that can be tailored to suit your specific needs and a variety of elastomers for specialty services. Whether you’re looking for a solution for controlling fluids in harsh environments or need a valve that can handle high-pressure applications, the ASCO Series 370 solenoid valves are a great choice. These valves are made with high-quality materials and are built to last, ensuring that you get reliable performance for years to come.

Series 370 - 1/4 Brass and Stainless Steel In-Line

ASCO Series 370 are high-quality solenoid valves that are designed to meet the needs of various industrial and commercial applications, particularly those in the oil and gas, and power industries. These valves come equipped with three ports in their bodies, making them very convenient to install and use. With a compact design that has been proven to be reliable, the ASCO Series 370 solenoid valves are also built to withstand tough environments. They come with a wide range of enclosures that can be tailored to suit your specific needs and a variety of elastomers for specialty services. Whether you’re looking for a solution for controlling fluids in harsh environments or need a valve that can handle high-pressure applications, the ASCO Series 370 solenoid valves are a great choice. These valves are made with high-quality materials and are built to last, ensuring that you get reliable performance for years to come.

Series 370 - ASCO Direct Operated Inline Solenoid Valves G1/4

Series 344 – ASCO 4/2 Pilot Operated brass solenoid valves have a rugged forged brass body which is specifically designed to provide maximum flow capability. The solenoid valves have poppet type seats and discs to provide tight sealing. The solenoid valves satisfy all relevant EC Directives.

Series 344 - ASCO 4/2 Pilot Operated Brass Solenoid Valves NPT1/4-NPT1

ASCO Series 344 valves have rugged forged brass bodies designed to provide maximum flow in bistable or monostable function settings. These valves have poppet type seats and discs to provide the tightest of sealings. These solenoid valves naturally satisfy all relevant EC directives.

Series 344 - Pilot Operated High Flow Heavy Duty Solenoid Valves G1/4 - G1

The Numatics Series L1 ASCO air valves are known for their speed and high flow capacity in a compact design. They are available with either solenoid pilot or air pilot actuation, and their slim design (.875″ body width) makes them ideal for inline mounting or mounting on one-piece extruded manifolds from 2 to 12 stations. One of the key features of the L1 Series valves is their compact size, which makes them well-suited for use in applications where space is limited. They are also known for their durability and reliability, and they are suitable for use in a wide range of industries, including automotive, bottling, tire manufacturing, and press room and metal stamping. Overall, the Numatics Series L1 ASCO air valves are a reliable and high-performance choice for anyone in need of fast, high-capacity air valves in a compact design. This valve boasts a service life of over 200 million cycles thanks to lapped spool and sleeve technology. Completely assembled manifolds are also available. Particularly recommended for use in high-temperature or dirty environments.

Series L1 - Numatics Steel Spool & Sleeve Valves Air Operated G1/8-G1/4

The Numatics Series L1 air valves are known for their speed and high flow capacity in a compact design. They are available with either solenoid pilot or air pilot actuation, and their slim design (.875″ body width) makes them ideal for inline mounting or mounting on one-piece extruded manifolds from 2 to 12 stations. One of the key features of the L1 Series valves is their compact size, which makes them well-suited for use in applications where space is limited. They are also known for their durability and reliability, and they are suitable for use in a wide range of industries, including automotive, bottling, tire manufacturing, and press room and metal stamping. Overall, the Numatics Series L1 air valves are a reliable and high-performance choice for anyone in need of fast, high-capacity air valves in a compact design. This valve boasts a service life of over 200 million cycles thanks to lapped spool and sleeve technology. Completely assembled manifolds are also available. Particularly recommended for use in high-temperature or dirty environments.

Series L1 - Numatics Steel Spool & Sleeve Valves Solenoid Air Operated G1/8-G1/4

Series L2 – Numatics boasts a service life of over 200 million cycles thanks to lapped spool and sleeve technology. Completely assembled manifolds are also available. Particularly recommended for use in high-temperature or dirty environments.

Series L2 - Numatics Steel Spool & Sleeve Valves Air Operated G1/4-G3/8

Series L2 – Numatics boasts a service life of over 200 million cycles thanks to lapped spool and sleeve technology. Completely assembled manifolds are also available. Particularly recommended for use in high-temperature or dirty environments.

Series L2 - Numatics Steel Spool & Sleeve Valves Solenoid Air Operated G1/4-G3/8

The AVENTICS Series L01 valves are known for their rugged spool and sleeve design and direct solenoid actuation, which make them ideal for high cycle rate applications. They are 4-ported, 2 and 3 position, 4-way valves that are suitable for use in a wide range of industries and applications. One of the key features of the AVENTICS L01 valves is their direct solenoid actuation, which allows them to respond quickly and accurately to changes in pressure or flow. They are also available with a DIN plug-in solenoid with an indicator light, which can help to improve their performance and reliability. The AVENTICS L01 valves are suitable for use in unlubricated or lubricated service, and they are available with integral speed control for improved control and precision. They can be mounted in-line or on a manifold, and they are designed to meet the requirements of NEMA 4/IP65. Overall, the AVENTICS Series L01 valves are a reliable and high-performance choice for anyone in need of a valve that can handle the demands of high cycle rate applications. This valve has a long service life of more than 200 million cycles thanks to lapped spool and sleeve technology.

Series L01 - Numatics Line Mounted Valves

Official Platinum Distributors for ASCO & Aventics

Series 327 - Brass and Stainless Steel, High Flow - Exida Approved

Series 327 - Direct Operated, Basic Flow, Balanced Poppet, 1/4

Series 327 - Direct Operated, High Flow, Balanced Poppet, 1/4-1/2

Series 327 - Solenoid Valve Direct Operated Balanced Poppet G1/4

Series 327 - Solenoid Valves No Voltage Release Manual Reset (Tamperproof)

Series 551 - Solenoid Spool Valve

ASCO Series 316 - Pilot Operated, High Flow, Floating Diaphragms, G3/8 - G1

Series 316 - ASCO High Flow Floating Diaphragm Solenoid Valves NPT3/8-NPT1

Series 316 - Pilot Operated High Flow Floating Diaphragms G3/8 - G1

Series 320 - 1/4, Brass and Stainless Steel, in-line

Series 320 - ASCO JOUCOMATIC 3/2 Roller Pilot Valves G1/8

Series 320 - Pilot Valve For Panel Mounting 22mm and 30mm

Series 314 - ASCO Numatics Direct Operated Solenoid Valves G1/4

Series 314 - ASCO Numatics Direct Operated Solenoid Valves G1/8

Series 314 - Directed Operated Core Disc Solenoid Valves, 1/8 - 1/4

Series 342 - 4/2 Way Direct Operated Slide Disc Single/Dual Solenoid

Series 342 - ASCO 4/2 Direct Operated Brass Solenoid Valves NPT1/4-NPT3/8

Series 256 - ASCO Direct Operated Solenoid Valves G1/4-G1/8

Series 256 - ASCO Direct Operated Solenoid Valves Manifold Subbases G1/8

Series 345 - ASCO 5/2 Pilot Operated Brass Solenoid Valves NPT1/4

Series 307 - ASCO JOUCOMATIC Push Button Valves - 22mm Panel Mount

Series 307 - Direct Operated Full Flow Cast Iron Or St Steel Enclosure G1/4 - G1/2

Series 307 - Pilot Operated Pressure Assisted Balanced Poppet Valves G1/4 - G1/2

Series 307 - Solenoid Valves No Voltage Release Lever Type

ASCO Series 307 valves are three way solenoid valves with orifice and pipe connections in the valve body. Valve can be operated with no minimum operating pressure. Brass and Stainless Steel balanced poppet valves with full flow capacity. These solenoid valves satisfy all relevant EC Directives

Series 307 - Solenoid Valves No Voltage Release Manual Reset Type

Series 356 - ASCO Direct Operated Solenoid Valves G1/8, G1/4

Series 356 - ASCO Direct Operated Solenoid Valves Multiple Manifold G1/8

ASCO Series 257

Series 308 - ASCO JOUCOMATIC 3/2 Heavy Duty Roller Pilot Valves

High-flow/high-pressure bodies on the ASCO Series 308, also known as 8308, tamper-proof manual reset solenoid valves help to minimise unintentional valve startup. They are perfect for managing crucial processes in hostile settings.

Series 308 - Solenoid Valves No Voltage Release Lever Type

Series 310 - ASCO JOUCOMATIC 3/2 Roller Pilot Valves 4mm-G1/8

Series 310 - ASCO JOUCOMATIC Push Button Valves

Series 260/360 - ASCO 2/2 - 3/2 Miniature Solenoid Valve Rocker Pad Mounting Body

Series 408 - Solenoid Valves No Voltage Release Lever Type

Series 110 - ASCO Dust Collector Pilot Valve Boxes

Series 370 - 1/4 Brass and Stainless Steel In-Line

Series 370 - ASCO Direct Operated Inline Solenoid Valves G1/4

Series 344 – ASCO 4/2 Pilot Operated brass solenoid valves have a rugged forged brass body which is specifically designed to provide maximum flow capability. The solenoid valves have poppet type seats and discs to provide tight sealing. The solenoid valves satisfy all relevant EC Directives.

Series 344 - ASCO 4/2 Pilot Operated Brass Solenoid Valves NPT1/4-NPT1

ASCO Series 344 valves have rugged forged brass bodies designed to provide maximum flow in bistable or monostable function settings. These valves have poppet type seats and discs to provide the tightest of sealings. These solenoid valves naturally satisfy all relevant EC directives.

Series 344 - Pilot Operated High Flow Heavy Duty Solenoid Valves G1/4 - G1

Series L1 - Numatics Steel Spool & Sleeve Valves Air Operated G1/8-G1/4

Series L1 - Numatics Steel Spool & Sleeve Valves Solenoid Air Operated G1/8-G1/4

Series L2 – Numatics boasts a service life of over 200 million cycles thanks to lapped spool and sleeve technology. Completely assembled manifolds are also available. Particularly recommended for use in high-temperature or dirty environments.

Series L2 - Numatics Steel Spool & Sleeve Valves Air Operated G1/4-G3/8

Series L2 – Numatics boasts a service life of over 200 million cycles thanks to lapped spool and sleeve technology. Completely assembled manifolds are also available. Particularly recommended for use in high-temperature or dirty environments.

Series L2 - Numatics Steel Spool & Sleeve Valves Solenoid Air Operated G1/4-G3/8

Series L01 - Numatics Line Mounted Valves

Leaving So Soon?

🔔 Stay in the Know with Valves-Direct! Get Exclusive Offers and Updates. 📬